ZM Heavy Duty SUKOM Primula-R Series Two Pass Boilers 18kW – 70kW – Suitable for Multi-Fuel ‘Waste Oil’ Burners

Brand:
SKU:
EAN:
Price: £1,695.00 +VAT
In Stock

ZM Heavy Duty SUKOM Primula-R Series Two Pass Boilers 18kW – 70kW
Suitable for Multi-Fuel ‘Waste Oil & Bio Oil’ Burners 

The Primula R Type Boilers are intended for burning liquid and gaseous fuel with the help of fan burners. Pairing the boiler with our Multi-Fuel Burners or on liquid or gaseous fuel gives the maximum performance of the boiler and a 94% efficiency. These boilers are designed for all the unique demands of providing hot water heating systems when running on Biodiesel, Vegetable oils, Mineral & Used Engine Oils, Raw vegetable oils (rapeseed, sunflower, and others), including post-frying or conventional Heating oils, that in turn provides an inexpensive hot water heating solutions with extremely low running cost.

The ZM Primula R Type series of Boilers are designed for perfect compatibility with our Citerm Multi-Fuel ‘Waste Oil’ Burners. These Citerm Multi-Fuel Oil Boilers are also manufactured in the EU, are extremely robust and sold worldwide. They combine exceptional prices with excellent quality for unbeatable value. The range runs from 18 – 300 kW making them ideal for Small, medium, domestic or large and extra Large commercial warm water applications. Heat can be obtained from a wide range of fuels that can be handled by the Citerm Multi-Fuel ‘waste oil’ Burners.

FUELS THAT CAN BE USED WITH MULTI-FUEL BURNERS

  • Vegetable oils (biofuels)
  • Heating Oil, 35 Second Fuel
  • Raw vegetable oils (rapeseed, sunflower, and others), including post-frying (gastronomy)
  • Mineral oils (used engine, gear, hydraulic and diesel oils of HBO I, II, III type with a viscosity not higher than SAE80)
  • Paraffin/Kerosene, 28 Second Fuel (Optional)
  • Diesel & Red Diesel

Optional Flue kit Available

Need Technical Help or Advice?
Call the ZM Team we are here to Help: 0333 600 4460  or Email info@zmh.uk.com

(Delivery & Installation)
After any purchase, all customers are contacted by the ZM Customer Service Team, to coordinate your delivery and the pre install technical checks

Payment Options

  • Credit & Debit Card
  • PayPal & PayPal Credit (4 months interest free credit over 4 installments)
  • Bank Transfer
  • Lease Purchase

Equipment Lease Purchase Application
We can offer lease purchase option on this item and to enquire simply use the “Quote / Question“ button option below and the ZM Customer Service Team will contact you to discuss the options.

 

  • Need Help? 0333 600 4460
    Our dedicated customer service is here to help
  • Direct From Suppliers
    To UK Mainland

FEATURES

ZM Heavy Duty SUKOM Primula-R Series Two Pass Boilers 18kW – 70kW

Suitable for Multi-Fuel ‘Waste Oil’ Burners

The Primula R Type Boilers are intended for burning liquid and gaseous fuel with the help of fan burners. Pairing the Primula R Type Boiler with our Multi-Oil Burners on liquid or gaseous fuel gives the maximum performance of the boiler and a 94% efficiency. These boilers are designed for all the unique demands of providing water heating systems when running on biodiesel, Oils, Waste Oils, including Engine and hydraulic oil, vegetable oils, and a range of other fuels that in turn provides an inexpensive water heating solutions with extremely low running cost.

The ZM Pemular R Type series of Boilers are designed for perfect compatibility with our Citerm Multi-Fuel ‘Waste oil’ Burners. These Multi-Fuel ‘Waste oil’ Boilers are manufactured in the EU and sold worldwide. They combine exceptional prices with excellent quality for unbeatable value. The range runs from 18kW– 320kW making them ideal for medium and large domestic or commercial warm water applications. Heat can be obtained from the fuel range of fuels that can be handled by the Citerm Multi-Fuel ‘waste oil’ Burners.

The boiler is made as a three-draft high-pressure type of boiler with a reversible flame tube and a bundle of smoke tubes. The first and second heat exchange takes place by the radiation method in the reversible flame tube, while the third heat exchange takes place in the smoke pipes before the flue gases leave the boiler mainly by convection and conduction methods. Due to the use of fan burners, turbulators are installed in the flue pipes, which enable a better heat exchange of flue gases and water and thereby increase the boiler utilization rate. The construction of the boiler itself is such that it ensures free expansion of the flame tube and the tube bundle, so that these boilers can easily withstand sudden changes in the operating mode of the heating system. The body of the boiler is well insulated with mineral wool and the casings are protected by plasticization procedures.
The boiler is intended to produce hot water in operating modes 110/90ºC and 90/70ºC with a maximum operating pressure of 2.5 bar. (For boilers 18-60kW) and 3 bar (for boilers 80-300kW). Combustion air regulation is done through burner automation and boiler automation and the boiler is protected against increased pressure by a safety valve installed in the prescribed place on the boiler.

ADDITIONAL INFORMATION

SPECIFICATIONS

The ZM Primula R series Boilers are designed for perfect compatibility with our Citerm Multi-Fuel ‘waste oil’ Burners.

These waste oil boilers are made in the EU and exported worldwide. They combine exceptional prices with excellent quality for unbeatable value.

The Sukom Primula range runs from 18kW – 320 kW making them ideal for any medium or large domestic applications and agricultural or commercial premises requiring warm water heater systems. Heat can be obtained from a wide range of fuels that can be handled by our Citerm Multi-Fuel ‘Waste Oil’ Burners. POA for higher capacity boilers

Our choice of Sukom Primula Boilers can be supplied on their own, or with our Citerm Multi-Fuel ‘Waste Oil’ Burners already mounted wired and ready to go. You will need to order the compatible Citerm JUNIOR waste oil burner or Citerm G Series for boilers rating, we can recommend the correct burner.

The waste oil boilers are manufactured in Europe to meet all CE standards and include a 3 years parts warranty. Our manufacturers specialise in burners, boilers and heaters to run on a range of ‘off grid’ fuels including wood, coal, straw, wood pellet and waste oils.

The boilers are designed to manage the challenges of these fuels over extended periods of time. They allow easy access for cleaning and ash removal.

Product Sheet (PDF) for DTTK Waste Oil Boilers : Waste Oil Boilers

Key Features :

♦  Suitable for gas or light oil, waste oil, semi-heavy oil and bio fuels

♦  Two-pass triple-draft furnace with flame tubes and turbulators for high efficiency (94%), efficient combustion, low emissions and lower flue gas temperature

♦  Fully insulated design prevents heat loss whilst oval construction allows higher working pressures (up to 5 bar) and higher working temperatures (up to 110 degrees C)

♦  Digital control panel with simple and clear information and controls

♦  Easy access through front door to all parts of the boiler chamber for quick, easy cleaning and ash removal

For more details, including weights, dimensions etc please refer to the waste oil boiler product sheet.

Availability: Special Order 3 – 5 Weeks
Model: Sukom Primula-R Series
Description: Heavy-duty ‘Waste Oil’ suitable 18 – 70 kW two pass boilers