ZM155HWH Multi Fuel Oil Air Heater with Central Heating and Hot Water Coil 39kW-57Kw (133,000 to 194,000 BTU/HR)

ZM155HWH Multi Fuel Oil Air Heater with Central Heating & Hot Water 35kW-57Kw (120,000 to 194,00 BTU/HR) for Workshops, Garages, Industrial & Agricultural Units

ZM155HWH Multi Fuel ‘Waste Oil’ Air Heater with Central Heating & Hot Water Coil allows this unit to be used as a hot water boiler as well as a warm air blower and can also be connected to a hot water heating system and delivers 35kW – 57 kW of heat (194,000 Btu).

This very high-efficiency heater and large built-in surface heat exchanger has an enclosed flame combustion chamber combined with a ‘THERMO’ blower, fan assisted air is blown into the furnace chamber for greater combustion.

ZM155HWH Multi-Fuel Oil Heater furnace produces a medium to high-power range of heat thanks to the variable fuel operation. Power control consists in smoothly increasing or decreasing the revolutions of the fuel feeding pump and the burning takes place evenly. The high-precision, low-speed gear fuel pump is specially designed for our multi oil heaters and modern oils and the provides 5,400m3 per hour of warm air.

ZM155HWH features our five light LED control panel which quickly shows the operating mode of the heater and generates heat from a wide range of oil based fuels including used engine oils, gear oils, hydraulic oils, as well as heating oil, red diesel/diesel.

This is a vaporising heater which means it is drip fed so it does not require compressed air. It is a semi automatic units that requires manual ignition and is ideal for small and medium sized workshops. It’s simple to use and set up, mains power 220-240V supply, includes an integral 75 litre fuel tank, economical to run and easy to support.

The ZM155HWH is supplied with our vertical draft stabiliser for connection to a 150mm Chimney flue system. This heater is made in the EU and fully CE approved with full UK support. Safety features including overheat, overflow and burner tray spill protection for complete peace of mind.

Key Features:

• 5,400m3 per hour air circulation option
• EcoWarm Water Heating Coil 8-9 kW
• High capacity heat exchanger for improved efficiency.
• Variable Heat Output 39 – 57 kW (133,000 – 194,000 BTU)
• New cabinet design for improved airflow and efficiency
• Enclosed combustion chamber with separate combustion fan for faster warm-up
• Burns waste oil and fuel oils (diesel, 35 sec heating oil)
• 230 – 240V mains supply
• Includes built in 75 ltr fuel storage tank

• COST EFFECTIVE!
• LOW RUNNING COSTS!
• CLEAN FREE HEAT!

FUELS THAT CAN BE USED

• Vegetable oils (biofuels)
• Raw vegetable oils (rapeseed, sunflower, and others), including post-frying (gastronomy)
• Mineral & Synthetic Oils (Including used engine, gear, hydraulic and diesel oils, HBO I, II, III type with a viscosity not higher than SAE80)
• Heating oil (28 second & 35 second fuels)

SUITABLE FOR TYPICAL MULTIPLE WORKSHOP APPLICATIONS

Also available with flue kit

• Product-Information
• Operating Manual
• Hot Water Heating Coil Accessory
• Quick Setup Guide

Need Technical Help or Advice?
Call the ZM Team we are here to Help: 0333 600 4460  or Email info@zmh.uk.com

(Delivery & Installation)
After any purchase, all customers are contacted by the ZM Customer Service Team, to coordinate your delivery and the pre install technical checks

Payment Options

• Credit & Debit Card
• PayPal 
• Bank Transfer
• Lease Purchase

Equipment Lease Purchase Application
We can offer lease purchase option on this item and to enquire simply use the “Quote / Question“ button option below and the ZM Customer Service Team will contact you to discuss the options.