EAN:
Price: | £2,795.00 +VAT |
ZM Citerm Multi-Fuel ‘Waste Oil’ G-Series Burner G3p+ (477,700 to 887,150 BTU) 140–260kW
LIST PRICE £3,995
ZM Citerm GP Series Multi-Fuel ‘Waste oil’ burners are the best robust and reliable burners available on the market today and sold all over the world. These burners can burn all types of oil, you can now get 60–300 kW of heat from a wide range of oils, including used, waste and heavy oils. All manufactured using only genuine top quality components from Siemens, Delavan, Suntec, Danfoss and others. The ZM Citerm GP Series burners are designed and engineered in Europe all to CE standards.
ZM Citerm Multi-Fuel Burners are the multi talented oil burner, that can run on multiple oils including waste oils.
Warm air space heater blowers remain the most economical way of heating commercial or industrial workshops, factories, garages, outbuildings or warehouse etc… This is especially so, when run with a ZM Multi-Fuel ‘Waste Oil’ Burner and used with waste oil instead of conventional heating oil or gas burners. ZM also offers a large product range of warm air heater blowers and two pass boilers that are all compatible with the ZM Citerm Multi-Fuel Burners, all specially designed for this purpose, that give you FREE HEAT by using waste oils as a heating fuel.
FUELS THAT CAN BE USED
- Vegetable oils (biofuels)
- Heating Oil, 35 Second Fuel
- Raw vegetable oils (rapeseed, sunflower, and others), including post-frying (gastronomy)
- Mineral & Synthetic Oils (Including used engine, gear, hydraulic and diesel oils, HBO I, II, III type with a viscosity not higher than SAE80)
- Paraffin/Kerosene, 28 Second Fuel (Optional)
- Diesel & Red Diesel
Need Technical Help or Advice?
Call the ZM Team we are here to Help: 0333 600 4460 or Email info@zmh.uk.com
(Delivery & Installation)
After any purchase, all customers are contacted by the ZM Customer Service Team, to coordinate your delivery and the pre install technical checks
Payment Options
- Credit & Debit Card
- PayPal & PayPal Credit (4 months interest free credit over 4 installments)
- Bank Transfer
- Lease Purchase
Equipment Lease Purchase Application
We can offer lease purchase option on this item and to enquire simply use the “Quote / Question“ button option below and the ZM Customer Service Team will contact you to discuss the options.
-
- Need Help? 0333 600 4460
- Our dedicated customer service is here to help
-
- Direct From Suppliers
- To UK Mainland
ZM CITERM MULTIFUEL BURNERS
ZM Citerm’s GP series of multi-fuel ‘waste oil’ burners will burn a wide range of fuels including used engine oils, gear, hydraulic and diesel oils of HBO I, II, III type, Vegetable oils (biofuels), Raw vegetable oils (rapeseed, sunflower, and others), Heating Oil (35 Second Fuel), Diesel & Red Diesel and Paraffin/Kerosene (28 Second Fuel).
We have supplied for a number of years the ZM Citerm Burners and they have proven to be tough and very reliable. They work on the same principle as many other burners. Combustion is achieved through the control of primary air flow, secondary air flow and oil preheat temperature. All of these can be adjusted very easily to suit the application and fuel that is being used.
Used oil is typically preheated to reduce the viscosity then drawn through the delavan nozzles with compressed air and atomised into a fine spray where it is ignited by sparks from the electrodes on start up. A constant flame is maintained by the ‘swirl’ of the oil spray in front of the burner.
The range includes 5 models the G2p, G2p+, G3p, G3p+ and G4p+ the numbers denote the number of nozzles and the “+” simply shows that higher flow 30609-49 nozzles are fitted instead of DA-2 nozzles. It is also possible to downrate these burners with DA-1.5 or 30609-11 nozzles. This can be done to improve combustion at lower outputs or to improve running on low viscosity fuels like red diesel.
ZM Heaters are the exclusive distributors of these Citerm Burners and these are supplied complete with a high capacity washable filter and supply hoses to give you everything you need straight out of the box.
All ZM Citerm Burners come with a 12 months parts warranty.
Citerm GP Series ‘Waste 0il’ Burner Options
Key Features :
- Automatic waste oil burners
- Overflow cut off protection on all models.
- Safety features including overheat, flame out and over pressure comply with CE standards.
- Max outputs range from 60kW to 300kW.
- Suitable for 35 sec diesels too
- Fuel selection by simple adjustment of primary air, secondary air & oil temperature
- Integral oil preheats tank.
- Primary air atomisation, compressed air required.
- Energy saving and compatible with environmental requirements.
- Quiet operation, designed for easy maintenance.
- Reliable and trouble-free
How it works?
Fuel is pulled from the storage tank by pump into burner tank. A floating switch regulates the oil level in the burner tank, in the event of overfilling an additional floating micro switch along with a limit switch would indicate “malfunction” if this were to occur. A contact switch trips the burner in case of overflow in the tank and a thermostat regulates the oil temperature in the burner tank and switches the burner on automatically as soon as the regulated temperature is reached. An additional overheat thermostat prevents overheating or malfunctioning, the burner control box (SIEMENS LOA 24) also checks the entire procedure.
A special nozzle draws the fuel, by using the passing compressed air, which serves as primary air for the combustion, and atomizes it. The combustion fan delivers secondary air that is mixed with the spray mist at the flame ring. Thereby a perfect combustion and safe operating are guaranteed.
ZM GP CITERM burners are designed to burn: Vegetable oil, used crankcase oil, hydraulic and transmission oils, Extra light fuel oils, light and medium fuel oils, other flammable liquids…
The patented technology ensures the combustion of waste oil regardless of its viscosity or flash point. The antechamber heats all the oils to a temperature where they reach the same viscosity. The oil is sprayed with compressed air at a relatively low pressure. This enables the use of larger nozzles that do not clog even when using fertilizer or semi-liquid oil.
What is necessary to use the burner?
- Warm Air Heater Cabinet or a Boiler
- Compressed air (pressure in the range 2 – 15 bar)
- Tank
- Current voltage: 230~V; 1280W; (6 Amp.)
The Citerm GP series of burners are intended for industrial or commercial use, and reflect the many years of experience and commitment in the development of ‘green’, efficient and high quality products in this area. We have achieved high standards and at the same time as offering you a very affordable product.
CITERM burners are designed for the following fuels: EL fuel oil, bio-diesel, domestic oil, organic oil, waste oil, as well as for combinations of all of the above.
Availability: | 7 – 10 Working Day |
---|---|
Model: | CITERM G SERIES |
Description: | Multi-fuel ‘Waste Oil’ Burners 60 – 300 kW Citerm G series |
Compressed Air: | Yes |
Fuels: | Various oils, Heating oils, Waste & Used Oils |
Dimensions: | On application |
Max. Heat Output: | 60 kW to 300 kW |
Power Supply: | 230-240 V |
Weight: | 16 – 19 Kg |
Power: | 200 – 1200W |
Air used: | 7 – 19 cfm |